WiFi or Twisted Pair? So you want a future-proof option with a cost-effective choice. Well, you have landed on the right page. This title will explain the Cat 6 Riser Cable, the gigabit cable with maximum mileage.

The wired cables are the fastest from every wireless source well this is a fact for the twisted pair cables. So when do you want the quickest ethernet cable? This is very simple, you just need to check the potential speed of your server. This is from the ISP side and there are two possibilities whether you have 1 Gbps or 10 Gbps. But there are also the users with 20, 50, or 100 Mbps speed. They need to ask for an upgrade before upgrading the Cat6 riser copper ETL listed cable.

This blog covers the needed information for you to grab the maximum knowledge about the ethernet cable that is beneficial for selecting the cable. So, let’s jump into the study pool regarding the Cat6 riser cable 1000ft. 

The Category 6 Ethernet Cable

Cat6 ethernet cable is the next upgrade in the ethernet cable category which is also known for its gigabit speed. The Cat6 Riser Bare Copper is the answer to your high-density applications. This is not a theoretical statement but it caters to the most sophisticated type of ethernet applications.

Here are some points that make the Cat6 riser 1000ft cable the best choice for your daily needs.

• Internal Structure – The Cat 6 riser cable features all the favorable terms tight twisted pairs that are used to minimize the crosstalk. There are 6-7 twists per inch in each twisted pair. This zigzag pattern will allow the electric current to flow easily and without the crosstalk. 
• Spline — The spline is a plastic material cross-skeleton structure that is ideally present between the twisted pair to separate them. This is formally beneficial to overcome the pair-crosstalk. 
• Rigid structure — The cat6 riser bare copper cable uses “Bare Copper” in its core and therefore this cable can be used for longer runs and also maintain the signal integrity. 

Key Features of Cat 6 Riser Cable

The above section explains the overall features of the Cat 6 riser cable but here we are going to discuss the key features of the bulk Cat6 riser 1000ft cable.

Important Tip: Before buying the ethernet cable Speed, Bandwidth, and Conductor should be your first consideration.

The first important aspect of the Cat6 riser cable is the “Speed”. The cat6 riser cable supports two types of speed ratings at the maximum and minimum installation lengths. For a minimum length of 164ft, the cable caters to the highest speed of 10 Gbps. However, at a maximum length of 328ft, the Cat 6 riser cable supports 1 Gbps speed. So at longer distances, the Cat6 network cable can uphold gigabit speed. 

The second important thing to consider is the bandwidth of the cable. Like the Cat 6 riser cable, the cable delivers 550 MHz bandwidth. The cat6 cable uses bare copper, a solid conductor in its core. The diameter of each twisted pair is 23 AWG which tells the thickness of the conductors.

Last but not least, the conductor, Which one is better? CCA or Bare Copper? One is cost-effective and the other is expensive but durable. So, for utmost performance results Cat6 riser bare copper is a nice investment and addition. There are some important aspects of Bare Copper Conductors

• Low electrical resistance
• Anti-corrosive properties
• Flexible to install
• Good for PoE/+/++
• Used for longer data transmission
• Durable and Performance

Is Riser Jacket Safe For Installing Outside?

No, the riser jacket cannot be installed outside the building to extend the connection from one building to another. The reason is simple: the riser jacket lacks UV-resistant, waterproofing, and cannot tackle extreme weather conditions.

Here you need to understand the concept of the Riser Jacket. What is that? The outer jacket of the Cat6 riser cable 1000ft is made of PVC (Polyvinyl Chloride) FR-Resistant Jacket. Here “FR” is a short form of Fire-Resistant.

There is another term Plenum and Direct Burial. For indoor cabling Cat6 riser cable and Plenum are used. Whereas, for outdoor installation needs Cat6 direct burial is used. 

Does Cat6 Cable Be Used With Cat5e For Extending Length?

We often need patch cables for extending the cable length as the ideal installation length for any ethernet cable is 100 meters. But can you connect the previous cable with the upgraded one? This is common sense for those who are aware of the cable features. But those who are less aware of the speed and other factors can infiltrate themselves into cable mess.

Let’s suppose you have installed the cat6 riser cable and there you need to extend the cable length. The cat5e cable is not good for cable extension. The theory behind this is that the cat5e cable supports 100 Mbps and at a shorter length, it caters to 1 Gbps speed. When you are likely to connect the cat5e cable it might not work for 1 Gbps or you get a slow speed.

It is not recommended to extend the cable length with the previous category cable but for that, you could buy Cat6 patch cable in pure copper which will save time and cost. At the end of the day, you will have peace of mind. 

Final Thought

The Cat 6 riser cable is the ultimate need for everyone to provide your server with the gigabit speed cable. Cat6 riser bare copper cable is the demand for every residential, commercial, and industrial setup. 

A few applications are commonly used from cat 6 riser 1000ft — 100/1000BASE-T, 10GBASE-T, PoE, 4K visuals, and audio streaming. If your cable lags or is not working properly time to shift to the most quality and performance-oriented cable — The Cat6 Riser Cable.