Knowing how to properly place downspouts is a critical task since good placement depends on everything working perfectly. It is important to know where and how to connect a downspout to your gutters so that future problems do not arise.

For this, the ideal is always to have a company specialized in installing gutters to guarantee good placement and perfect drainage of rainwater.

We are going to see in more detail how to install downspouts and where it is preferable to connect these downspouts to the gutters.

Aspects to consider for the connection of downspouts and gutters

There are different variables to take into account. Although it is usual to place the downspouts in the center of the gutters, other elements must be considered such as the inclination of the ground, the proximity of the nearest drain and, in general, the area that allows better evacuation of rainwater.

There is no distinction between gutter styles when placing downspouts . The shape is the same, although with certain materials it is easier to operate, such as aluminum gutters that are easier to cut than other gutters with metallic materials, for example.

In any case, you must always keep in mind that the installation of the entire rainwater evacuation system must be done so that everything works perfectly.

This means that it always falls into the hands of experienced professionals . If this is not done, the risk of suffering major breakdowns later with leaks, leaks and humidity in general may involve a much greater expense than that of hiring professionals in the sector.

Where to place downspouts in the gutter system

When it comes to establishing the most appropriate location for downspouts, it is usually chosen to install it in the center of the gutter duct. Another common spot is in the corners of the building.

Both options usually respond more to aesthetic and design criteria. But sometimes it is preferable to be more functional and think about the objective of the downspouts and the evacuation system, which is none other than to convey rainwater to the drainage areas.

But it is not always the most suitable place. The ideal is always to make a general design of the entire structure taking into account the slope of the ground and the proximity to the drainage area.

Installation in the center of the gutters

First of all, you must always check the inclination of the gutters and carry out water conduction tests to ensure that the flow will flow without obstacles.

In cases of installation on roofs with eaves, it may be necessary to incorporate an elbow that connects the gutter to the downspout, ensuring that the vertical ducts are always attached to the façade of the building .

Installation at the ends of the gutter

Regarding the ends of the gutters, it is essential to install covers to prevent water from escaping through these points and guarantee its correct evacuation through the downspout that descends along the façade to the nearest drain.

Both options can have a good aesthetic result without a doubt, depending a lot on the general style. But once again we recommend that you always take into account the inclination of the ground, prioritize functionality so that the downspout system fulfills its function perfectly and let yourself be advised and guided by professionals.

In addition, it is necessary to calculate the capacity of the storm drainage system, estimating the number and thickness of the downspouts required to guarantee efficient drainage.

Place the downspout between two pieces of gutters

On the other hand, in certain situations it may be more convenient to install the downspouts between two pieces of gutters, always considering the inclination and the distance to the nearest drain.

How to connect downspouts to the gutter

We can give you this same advice when connecting the rain downspouts to the gutter , a poor connection will cause leaks and leaks.
If this happens, the expense on repairs and renovations will be very high, as will the inconvenience it will generate in your family home.

Having specialized professionals is always a smart option.

To connect the downspout to the gutter, you must always use screws or rivets at the connection point.

In most cases it will be necessary to fit a downspout elbow at the end of the outlet pipe , especially on roofs with eaves to bridge the gap and so that the downspout pipe can run down against the wall of the building.

Fix another elbow to the wall of the house and, if necessary, place a small section of downspout between both elbows to bridge the distance between them.

The fundamental objective is that the entire downspout conduit is well attached to the façade at all points and there is no danger of loose areas.

This always guarantees the appropriate inclination throughout the system so that the water circulates perfectly throughout the entire route.

You must check that all the pieces fit perfectly and ensure a solid and secure connection using screws or rivets at the joints.